The Hydraulic Object Icons on the Main ToolBar

Intersection	Outlet	Hydrant	Nozzle
Pipe	Pump	Reservoir	Tank
For Individual or for QuickBuild sequence drawing, to place any individual Hydraulic Object, load it to the cursor by clicking on any of the Object Icons below: Then, place it into drawing.

Click on the Individual Object, in this case an Intersection Junction
(Process is the same for all Node Objects)

Object then loads onto the cursor > Left-Click to Place the Object in Drawing

Valve Objects are a 2 Step process,
1. Setting the Valve Type
2. Clicking to place the Type that is Set.
Start by opening the Pulldown Menu
1. Set the Type
from the PullDown Menu
2. Click on the Type that was set
to place the Valve in the Drawing
These, along with connecting Pipes are the basic Hydraulic model Objects

In this case, the PRV Template had not been built, OR the Display Style does not include PRV, thus no Scale Factor was present and it came in very small.
Scale Factor can be set in the Properties Palette

Select the Valve, then Open Properties Palette to Edit the Scale Factor